Miscellaneous Equipment

743L100=110 L.A.S.A.R.™ Posture

The L.A.S.A.R. Posture generates a laserbeam to quickly and precisely determine the center of balance. This beam is projected as a vertical laser line on the body or object being measured. The laserbeam can be shifted. L.A.S.A.R. can be used to check alignment. The display unit serves to indicate the measured values and to control measuring.

The L.A.S.A.R. Posture

Force-sensing platform with integrated force measurement cells
Projection system with laser and line optics
Positioning system with electronics and step motor
Display unit
Leveling plate

Technical Data

Power	110V, 60 Hz
Measurements:
Folded	55 W x 15 H x 70 D cm
Open	55 W x 15 H x 120 D cm
Weight	9.5 kg

Laser

The laser is rated to Laser Class 2 (under normal operating conditions, the Laser Class 1 [DIN 60825] threshold value is not exceeded).

758G5=1 Otto Bock Test Platform with Ramp and Stairs

The Test Platform with Ramp and Stairs offers you the option of testing your patients in situations similar to those in everyday life. Use it for seminars, patient appointments and demonstrations. Requires assembly.

Technical Data

Length	300 cm
Height of handrail	95 cm
Height of platform	51 cm
Width	62 cm
Material	V2A-steel base. Aluminum alloy stairs, ramp and handrail with clear lacquer
Weight	145 kg

758G1=4 Parallel Bars

Powder-coated steel construction, height adjustable from 64 to 100 cm, width adjustable between 0 to 60 cm, with canted bases. May be folded for storage when not in use.

Article no.	Length	Bar Weight/Shipping Weight
758G1=4	400 cm	61/4 kg

710D4 Torque Wrench

Span 4-30 Nm (35.4-265.4 lbf. in.), square drive for bit holder with 1/4" hexagon drive.

Torque value set on end of grip and visible on the scale, with bits	710Y2=3, 710Y2=4, 710Y2=5, 710Y2=6, 710Y2=8, 710Y2=10

Total wrench length	24.5 cm
Weight	0.560 kg

755T5 Vacuum Deep Draw Tools

Consisting of

	755X21	Stand Size 49 x 32 x 30 cm
	755T4=360	Circumferential Frame, aluminum, inner-ø 36 cm, for materials up to 2 cm thick
	755X18	Bracket
	755X22=360	Vacuum Tube with 755X93=360 Sealing Disk
	755X23	Two-way Vacuum Tube

758Y28 Angled Frames with Grates

Frames of galvanized angle iron for installation in the floor. Outer dimensions ca. 71.5 x 252 cm, with three galvanized steel grates 70 x 83 cm, weight 45 kg.