Belt Sanders
701P25=2G-USA–SP Otto Bock Belt Sander
For accurate sanding of right angle, flat surfaces. Improved suction with built-in suction insert and completely sealed machine body. Ř of collection system mount 10 cm, for use with central dust collection system with a minimum air velocity of 20 m/s and negative pressure of 1220 Pa.
Electrical Equipment
Motor protection switch, 2 m power cord.
Standard Equipment
3 pcs. 649G6=180 x 30 x 40 Linen Sanding Belts,
L x W 180 x 30 cm, grit 40
1 pc. 702F28=1 Floor Fastening Set
Technical Data
Dimensions | 70 W x 160 H x 77 D cm |
Space Requirement | 250 x 175 cm (approx.) |
Belt width | 30 cm |
Belt Speed | 12 m/sec |
Power | 208 V, 60 Hz, single phase |
RPM | 1/min 1500 |
Sander Weight/Shipping Weight | 400/485 Kg |
Color | light gray (RAL 7035) |
701P4=G-USA Otto Bock Two Speed Belt Sander
For accurate sanding of right angle, flat surfaces, floor model. Ř of collection system mount 10 cm, for use with central dust collection system with a minimum air velocity of 20 m/s.
Electrical Equipment
Motor protection switch, speed selection switch, 2 m power cord.
Standard Equipment
3 pcs. 649G6=200 x 25 x 40 Linen Sanding Belts,
L x W 200 x 25 cm, grit 40
1 pc. 709S15=6 Allen Head Wrench
1 pc. 709S21=8 Allen Head Wrench
1 pc. 702F65 Floor Fastening Set
Technical Data
Dimensions | 80 W x 152 H x 85 D cm |
Space Requirement | 140 x 180 cm (approx.) |
Belt width | 25 cm |
Belt Speed | 15/30 m/sec |
Power | 208 V, 60 Hz, single phase |
RPM | 1/min 1500/3000 |
Sander Weight/Shipping Weight | 107/155 Kg |
Color | light gray (RAL 7035) |
701P26=US 6" Belt/12" Disc Sanding Center™ (31-300)
Includes a 1.5 HP, 115/230 V motor (wired for 120 V operation); on-off toggle switch, stand, dust collector connector, sliding pivot pin for circle sanding, 80-grit abrasive belt, 50-grit abrasive disc, wrench and instruction manual.
Technical Data
MOTOR | 1.5 HP, 120/240 V, 60 Hz, single phase, |
SPEED | |
Belt | 3000 SFPM (914 SMPM) |
Disc | 2100 rpm |
ABRASIVE BELT | |
Size | 48" L x 6" W |
DISC DIAMETER | 12" |
TABLE SIZE AND TILT | |
Belt | 15" x 7 1/2" (Tilts 45° up and down) |
Disc | 12" x 16 1/2" (Tilts 45° up and down) |
Dust Collection | Diameter 4" |
OVERALL DIMENSIONS | |
Size | 31" W x 58" H x 19" D |
Weight | 290 lbs. |
Recommended Accessories For Belt Sanders
Linen Sanding Belt
Sanding Belt
Sanding Disk
For more details view the Accessories Page
